Próiseas Déanamh Puzal

There are various ways of cutting the joint lines of the puzzle pieces. Mainstream puzzles use a zero-piece edge style called "fully interlocking". "Comprehensive interlocking" is to connect several adjacent pieces together. If one of them is moved horizontally, all the connected pieces will slide in the same direction and will not be separated. Sometimes, the pieces are so tightly assembled that the whole piece will not fall apart when picked up.

Dún{0}}amharc suas ar cheangail na bpíosaí puzail

The interlocking of the pieces is usually achieved by the protrusions and depressions on the edges of the pieces, and this splicing method is similar to the "tenon and mortise joint" in furniture production. The main body of the piece is a rectangle with the same size and form. Assuming that the two pieces that are closely connected to the left and right are respectively A and B, if the right edge of piece A has a protrusion A extending to the right, then the left edge of piece B must have a shape similar to that of piece B. A matches the depression B, and in order to make A and B lock each other, the end of the protrusion A is required to be wider than the end connected to the edge of the nail plate. This kind of protrusion in the form of a wide front and a narrow back is called a dovetail in traditional woodworking. We might as well call the protrusions and depressions of the puzzle pieces "tenons" and "eyes". However, if the dovetail tenon with the tip is made on the cardboard, it is easy to layer and damage the parts, so the tenon and the mortise in the puzzle are mostly round.

In some jigsaw puzzles (probably the most common one), all the pieces have the same shape, each piece has two mortise and tenon which are axially symmetrical, and the axes of the tenon and mortise are crossed.卄" glyph. In this way, zero slices and zero slices are always criss-crossed. In some puzzles, the tenon and tenon structure of each piece is different from each other, but usually the main body of each piece is also quadrilateral, with a tenon or mortise on each of the four sides.

Non-interlocking puzzles are generally divided into pieces by intersecting curves of various forms, and the edge of the piece is also a section of the curve. In fact, the puzzle of this mode is relatively simple, because the matching between zero pieces and zero pieces is mostly fixed, and it is easy to find adjacent zero pieces according to the curve shape of the edge. It's just that players are required to be calm when assembling such a puzzle, otherwise it is easy to mess up the part that has been assembled if they miss.

Meastar gurb iad puzzles comhghlasála le nialas píosaí den chruth céanna na cinn is deacra le chéile, go háirithe iad siúd a bhfuil dathanna níos boige agus níos lú codarsnachta patrún acu, mar is minic nach mbíonn ach difríochtaí an-subtle idir píosaí.

Ó am go chéile, beidh roinnt puzzles ann le leagan amach an-aisteach, ar féidir leo níos mó spraoi a thabhairt d'imreoirí.

Is é pictiúr foriomlán an bhfreagra an ceann is coitianta, agus tá teorainn an phictiúir ina líne dhíreach nó ina cuar maisiúil rialta. Sa chineál seo puzal, bíonn roinnt píosaí ann i gcónaí nach mbíonn mortise agus teanón ar thaobh amháin acu, nó a bhfuil dronuillinn acu. Is féidir le himreoirí an fráma a chur amach go héasca, mar sin is minic a thosaíonn siad ó na coirnéil agus iad ag cur le chéile. Ar ndóigh, tá roinnt puzzles ann freisin a dhéanann na píosaí cúinne isteach i mortise agus tenon d'aon ghnó chun an cluiche a dhéanamh níos dúshlánaí. Tá roinnt smaointe níos cosúla le leanaí ann freisin, ag déanamh imlíne ar an bhfreagra iomlán ina n-ainmhithe beaga nó i gcruthanna gleoite eile. Toisc go bhfuil na línte contour níos tortuous agus fada, tá i bhfad níos mó píosaí ar an imeall ná puzzles cearnach, agus tá sé níos éasca a chur le chéile. Tá an cineál seo bhfreagra ar ndóigh níos oiriúnaí do imreoirí óga.

Le blianta beaga anuas, baineadh úsáid as trealamh gearrtha léasair agus hiodrálacha rialaithe ríomhairí agus ríomhairí chun míreanna mearaí a dhearadh agus a tháirgeadh. Mar gheall ar chur i bhfeidhm na dteicneolaíochtaí nua tá an mheicníocht chomhcheangail agus na stíleanna coda míreanna mearaí níos sofaisticiúla, agus tagann patrúin úra chun cinn ceann i ndiaidh a chéile.